70-100 m3/h with 700 mm extractor belt

The ORU LINK S batching unit differs from the competition mainly due to its higher functionality, efficiency, extensive range and transportability:


The review of the project has made the system more agile due to weight reduction, simplification and rationalisation of the unit. The bearing frame is lighter and simpler. 


The bearing structures are solid (bearing structure calculated for seismicity S12 (steel=0.35g), wind 120km/h) and completely hot galvanised to warrant maximum life and unchangeability over time.


The support legs are hinged to be able to be folded for transport. The ORU LINK S batching unit inclusive of foldable feed belt can be carried with a lowered truck and can be fitted complete with all its components in a 40 foot open top container (OT).


Its simplicity is also its strength and the keystone for the composition of mobile and transportable DRY batching plants (combination with ORU CUBE S and wheel kit).


Plant fully pre-assembled and pre-wired to ensure quick assembly.


The ORU LINK S batching and transfer unit does not require works for on-site installation. 
Compacted ground is sufficient (resistance 3-4 kg/cm2 in any case indispensable to ensure access of trucks to the site).

ORU LINK S is a unit for the batching and transfer of aggregates, cement, and water for DRY plants and it is completely mobile and easy to transport. This component has been devised for combination with ORU storage units such as CUBE and LOGIK.

All the versions comprise the same parts and differ only in the type of belt which is the item that determines the definition of the hourly production capacity.
All versions have the unloading point at a height of 4,100 mm (level referring to the metal conveyor).

Oru link misure

Main features

Complete with conveyor for loading truck mixers
Length m 10,2
Width mm 700
Type Lathed
Flow rate m3/h 188
Power rating kW 9,2
Capacity m3 2,8
Scale with loading cells (4) kg 3000
Screw (diameter) mm 273
Screw (power rating) kW 7,5
Injection meter DN50
2" pneumatic butterfly valve
60 ton cement silo
Galvanised caissons with reinforcement for silo bases in reinforced concrete (4x1.2x0.4, final weight 4.8 ton/each)
Cement transfer screws Ø 219/273/323 mm
Smoke suction system kit fumi (additional support legs, ladder and walkway for access to filter, suction hood, 11 kW suction device, 54 m2 dust exhausts)
System for additives
KCS silo safety system
Water system version IA3-E with 900 l/min water pump Power rating 7.5 kW
HPS control unit

Technical assistance request form


In compliance with the obligations arising from European Community legislation (European regulation 2016/679, GDPR and subsequent amendments), this site respects and protects the privacy of visitors and users, making every possible and proportionate effort not to infringe their rights.

This privacy policy applies only to the online activities of this site and is valid for its visitors/users. It does not apply to information collected through channels other than this website. The purpose of the privacy policy is to provide maximum transparency regarding the information that the site collects and how it is used.


This website processes data on the basis of consent. By using or consulting this site, visitors and users explicitly approve this privacy policy and consent to the processing of their personal data for the purposes and according to the means described below, including any disclosure to third parties necessary for the provision of a service.

The provision of data is optional, and therefore also the consent for gathering and processing the data. The user can deny consent, and at any time can revoke consent already given (using the Contacts link at the bottom of the page).


Like all websites, this site uses log files that store information automatically collected during user visits. The information collected could be as follows:
Internet protocol (IP) address; Type of browser and parameters of the device used to connect to the site; Name of the Internet service provider (ISP); Date and time of the visit; Webpage of visitor origin (referral) and exit; Number of clicks.

The information described above is processed automatically and collected exclusively in aggregate and anonymised form, for verification of the proper function of the site and for security reasons. Such information will be processed in conformity with the legitimate interests of the data controller.

For security purposes (spam filters, firewalls, virus detection), automatically recorded data could also include personal data such as the IP address, which could be used in accordance with applicable laws for purposes of blocking attempts to damage the site or cause damage to other users or other harmful or criminal activities. Such data are never used for the identification or profiling of the user, but only for the protection of the site and its users, and are processed pursuant to the legitimate interests of the data controller.

In the case of specific services requested by the user, the site detects and records some identification data of the user, including the email address. These data are understood to be voluntarily provided by the user at the time of their request for service (request for information). By submitting a request for information, the user accepts the privacy policy and consents that the content entered may be freely disclosed to third parties for the purposes stated.

The data received will be used exclusively for the provision of the service requested and only for the time necessary for such purpose.

The information that users of the site choose to make public through the services and means made available to them are provided by the user knowingly and voluntarily, exempting this site from any liability for any violations of laws. The user is responsible for verifying that they have permission to enter third-party personal data and any content protected by national or international laws.

The data collected by the site during its operation are used exclusively for the purposes described above and kept for the time strictly necessary to carry out the activities specified. In any case, the data collected by the site will never be provided to third parties, unless by reason of a legitimate request from the legal authorities and only in cases provided by law.

Data used for security purposes (blocking attempts to damage the site) are kept for a maximum of 45 days.


The data collected by the site are processed by the Data Controller, LE OFFICINE RIUNITE - UDINE S.p.A. located in Via Santa Caterina 35, Basaldella di Campoformido (UD), Italy, and are managed only by technical staff authorised for this purpose or by persons responsible for occasional maintenance operations.

data transfer to non-eu countries

This site may share some of the data collected with services located outside the European Union. Such transfers are authorised on the basis of specific decisions of the European Union and the European Data Protection Supervisor, in particular Decision 1250/2016 (Privacy shield), meaning that no further consent is required.

security measures

The present site processes user data in a lawful and correct manner, using appropriate security measures to prevent unauthorized access, disclosure, modification or unauthorised destruction of data. The processing is carried out by means of computer and/or telematic tools, with organisational methods and with logic strictly related to the purposes indicated. In some cases, in addition to the data controller, other classes of employees involved in the organisation of the site (administrative, sales, marketing or legal staff, system administrators) or external parties (such as providers of technical services, couriers, hosting providers, information-technology companies, communication agencies) could have access to the data.


Pursuant to the European Regulation 2016/679 (GDPR) and national legislation, the User may exercise the following rights, in the manner and within the limits provided by current legislation:

Receive confirmation of the existence of personal data concerning the user (right of access);
Know the origin of the data;
Receive intelligible communication;
Receive information concerning the logic, methods and purposes of processing;
Request the updating, rectification, supplement, erasure and transformation of the data in anonymous form, as well as the blocking of data processed in violation of the law, including in the cases of data no longer necessary to achieve the purposes for which they were collected;
Receive, in cases of processing based on consent, the data provided to the data controller in a structured format commonly used by electronic devices and readable by a data processor, at the sole cost of the medium used for transmission;
Complain to the Supervisory Authority (Authority for Protection of Personal Data);
More generally, to exercise all rights that are recognized by the current provisions of law.

Requests should be addressed to the Data Controller or the Data Protection Supervisor.

Where data are processed in accordance with the data controller's legitimate interests, the rights of data subjects concerning processing are nevertheless guaranteed (except for the right to portability, which is not provided for in the rules), in particular the right to object to the processing, which can be exercised by sending a request to the data controller.


The data controller is LE OFFICINE RIUNITE – UDINE S.p.A., with legal headquarters in Via Santa Caterina 35, Basaldella di Campoformido (UD), Italy, who can be contacted by telephone at +39 0432 563856 and by email at oru@oru.it
The Data Protection Officer is PRATIKA s.r.l., Via Carnia 1 - Rive d’Arcano (UD).

Technical assistance

Batching plants

Fill the assistance request form

In case of emergency call:
+39 0432 563972

Truck mixers

Fill the assistance request form

In case of emergency call:
+39 0432 563930

Attivazione garanzia

[ see map ]

Cuffie Remote Live support

Click on the icon below to download Anydesk Client

Download AnyDesk